All results 4485
Product
Multi-turn gearboxes
GP multi-turn gearboxes in combination with SA multi-turn actuators act as multi-turn actuators with higher output torques.
They are typically used with stem gate and wedge gate valves. Due to their compact design, these gearboxes can also be used in confined spaces.
To the product
Product
Linear actuators
Electronic actuators with variable speed control. Electronic setting of torque and stroke with function monitoring. Power supply unit with wide range input Actuator applications for demanding control automation tasks in industrial environments with potentially explosive atmospheres.
To the product
Product
Industrial Ethernet
Modbus TCP is a communication protocol for industrial automation technology based on Ethernet. Modbus TCP corresponds to the direct implementation of the established Modbus protocol (RTU) to a TCP/IP based communication. Existing Modbus applications can thereby easily use a connection-based, secure exchange of process data via an existing Ethernet network.
Contrary to other protocols, Modbus can handle delayed messages which occur often e.g. for modem connections or wireless networks.
This way, Modbus enables reliable control, device monitoring and data recording, even from a distance.
AUMA actuators with AC .2 actuator controls support Modbus TCP, allowing easy and flexible integration into virtually any type of network.
To the product
Product
Accessories
Frame for sealing the actuator against ingress of water and other pollution, even when disconnecting the electrical connection from the device.
To the product
Product
Accessories
The wall bracket (WH) and the cable set for wall bracket (LSW) allow mounting the actuator controls separately from the actuator.
Retrofitting is always possible and is particularly appropriate if actuators are difficult to access, subject to strong vibration or high ambient temperatures at valve level, for example.
The maximum permissible distance is 100 metres.
To the product
Product
Part-turn gearboxes
Part-turn actuators with base and lever offer consequently an ideal solution if valves like butterfly valves can only be operated using a lever arrangement, due to space constraints.
In case of higher torque requirement, SA multi-turn actuators are combined with a part-turn gearbox with base and lever. The gearboxes are based on GS part-turn gearboxes which are converted by the combination with base and lever. Since this can be fitted retrospectively, benefits in warehousing are obvious.
To the product
Product
Multi-turn actuators
If the drive shaft is to be positioned at a certain angle to the output drive shaft, combinations of the SA multi-turn actuators with GST spur gearboxes are used. The output torque can be considerably multiplied.
To the product
Product
Multi-turn actuators
The use of a frequency converter specially conceived for the actuator deployment offers many advantages. Besides the variable speed, the insensitivity to voltage and frequency variations, the lack of current increase during motor start-up as well as the valve protection by soft approaching of the end positions should be mentioned.
The rugged design makes these actuators extremely resistant to environmental impacts (standard corrosivity category C5, IP67, double sealed - enclosure protection is also ensured during commissioning) and can be further enhanced as an option.
The SEVEN actuator is available in three electronic variants: ECOTRON, PROFITRON and HiMod.
To the product
Product
Communication systems
Today, classic Ethernet is the leading standard for cable-based data networks in office environments. “Industrial Ethernet” describes the enhancements allowing the use of Ethernet even for sophisticated applications in industrial automation.
To the product
Product
Accessories
The handwheel stem extension allows accessibility of the handwheel even in spaces with difficult access and can be led through walls, for example.
The extension is available in a variety of lengths.
To the product