All results 4487
Product
AM (without display)
AM actuator controls with their straightforward design are the perfect choice when using parallel signal transmission while a relatively low number of feedback signals is required. Few parameters need to be defined via sliding switches during commissioning, e.g. type of seating in end positions. Control is made via operation commands OPEN, STOP, CLOSE. Reaching an end position and collective fault signals are reported back to the DCS as feedback signals. These signals are visually displayed at the local controls via the indication lights. As an option, the valve position can be transmitted as 0/4 – 20 mA signal to the DCS.
To the product
Product
AM (without display)
Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures. Certification is performed in close collaboration with national and international certification bodies. For multi-turn actuators SAEx/SAREx 07.2 – SAEx/SAREx 16.2 and part-turn actuators SQEx/SQREx 05.2 – SQEx/SQREx 14.2, AUMA MATIC AMExC 01.1 actuator controls with integral local controls are available.
To the product
Product
Multi-turn actuators
A sophisticated sealing system combined with excellent corrosion protection properties qualify AUMA actuators for underwater use.
Double sealed cable glands at the particularly crucial electrical connection safely prevent any ingress of water. Inner seals at all housing covers, sometimes coming in pairs, as well as a solid shaft made of stainless steel complete the universal concept.
To the product
Product
Multi-turn actuators
A sophisticated sealing system combined with excellent corrosion protection properties qualify AUMA actuators for underwater use.
Double sealed cable glands at the particularly crucial electrical connection safely prevent any ingress of water. Inner seals at all housing covers, sometimes coming in pairs, as well as a solid shaft made of stainless steel complete the universal concept.
To the product
Product
Multi-turn actuators
The TIGRON is a multi-turn actuator with classic mission: Automation of gate valves with/without rising stem, of globe valves (double block and bleed valves) and in combination with part-turn gearbox of butterfly valves and ball valves.
Virtually unlimited stroke
Rising stems are led through the hollow shaft of the multi-turn actuator which drives the stem in combination with the output drive type A. The stem protection tube protects the stem from pollution and people from injuries.
Open-close duty, positioning duty and modulating duty
TIGRON actuator versions are available for all types of duty. Combinations with multi-turn gearboxes In combination with GK or GST gearboxes, torques up to 16,000 Nm can be reached.
Modular AUMA scheme
Six gearbox type ranges are part of AUMA’s product portfolio. They are ideally suited to complete and enhance TIGRON’s application range even to other valve designs. This includes numerous butterfly valves or the conventional ball valves of the oil and gas industry requiring a part-turn movement of mostly 90 degrees. In these cases, TIGRON is combined with AUMA part-turn gearboxes.
AUMA linear thrust units convert TIGRON’s multi-turn movement into a thrust movement which is required for globe valve automation.
To the product
Product
Multi-turn actuators
With SAVEx .2 multi-turn actuators for open-close duty paired with intelligent ACVExC 01.2 actuator controls, the proven AUMA SAEx/SAREx range is enhanced by variable speed models.
SAVEx multi-turn actuators are rated for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min). Special sizing for longer running times is available for the S2 - 30 min duty.
To the product
Product
Multi-turn actuators
With SARVEx .2 multi-turn actuators for modulating duty paired with intelligent ACVExC 01.2 actuator controls, the proven SAEx/SAREx range is enhanced by variable speed models.
SARVEx multi-turn actuators are rated for modulating duty (class C) S4 - 25 %. Special versions for S4 - 50 % are also available.
To the product
Product
Part-turn actuators
When combining SA multi-turn actuators with GS part-turn gearboxes, the combination acts as electric part-turn actuator fulfilling higher torque requirements.
Thus, these combinations represent a complement to the SQ part-turn actuators with their 2,400 Nm torque range limit.
To the product
Product
AC (with display)
AUMA offers sophisticated control for premium safety requirements with AC 01.2-SIL or ACExC 01.2-SIL actuators controls. SA .2 and SQ .2 actuators combined with these actuator controls can be deployed in safety-related system systems up to SIL 3. AC 01.2 actuator controls in SIL version are equipped with an additional SIL module designed for the execution of safety functions. In case of an emergency at the plant and when requesting a safety function, the standard logic of AC is bypassed and the safety function is performed via the safe SIL module. Consequently, the safety function always overrules standard operation. SA .2 and SQ .2 actuators equipped with these actuator controls have been certified by TÜV Nord. They are suitable for the following safety functions:
Product
Multi-turn actuators
The TIGRON is a multi-turn actuator with classic mission: Automation of gate valves with/without rising stem, of globe valves (double block and bleed valves) and in combination with part-turn gearbox of butterfly valves and ball valves.
Virtually unlimited stroke
Rising stems are led through the hollow shaft of the multi-turn actuator which drives the stem in combination with the output drive type A. The stem protection tube protects the stem from pollution and people from injuries.
Open-close duty, positioning duty and modulating duty
TIGRON actuator versions are available for all types of duty. Combinations with multi-turn gearboxes In combination with GK or GST gearboxes, torques up to 16,000 Nm can be reached.
Modular AUMA scheme
Six gearbox type ranges are part of AUMA’s product portfolio. They are ideally suited to complete and enhance TIGRON’s application range even to other valve designs. This includes numerous butterfly valves or the conventional ball valves of the oil and gas industry requiring a part-turn movement of mostly 90 degrees. In these cases, TIGRON is combined with AUMA part-turn gearboxes.
AUMA linear thrust units convert TIGRON’s multi-turn movement into a thrust movement which is required for globe valve automation.
To the product