Company
Back to main menu
Back to side bar
All results 2717
Product
Multi-turn actuators
SAR multi-turn actuators are rated for modulating duty (class C) S4 - 25 %. Special versions for S4 - 50 % and S5 - 25 % are also available.
The actuators can be combined with different actuator controls: From simple OPEN-CLOSE actuator controls to the micro-controlled version with logging of operating data or fieldbus interface.
To the product
Product
Part-turn gearboxes with base and lever
Part-turn actuators with base and lever offer consequently an ideal solution if valves like butterfly valves can only be operated using a lever arrangement, due to space constraints.
In case of higher torque requirement, SA multi-turn actuators are combined with a part-turn gearbox with base and lever. The gearboxes are based on GS part-turn gearboxes which are converted by the combination with base and lever. Since this can be fitted retrospectively, benefits in warehousing are obvious.
To the product
Product
Multi-turn actuators
The use of a frequency converter specially conceived for the actuator deployment offers many advantages. Besides the variable speed, the insensitivity to voltage and frequency variations, the lack of current increase during motor start-up as well as the valve protection by soft approaching of the end positions should be mentioned.
The rugged design makes these actuators extremely resistant to environmental impacts (standard corrosivity category C5, IP67, double sealed - enclosure protection is also ensured during commissioning) and can be further enhanced as an option.
The SEVEN actuator is available in three electronic variants: ECOTRON, PROFITRON and HiMod.
To the product
Product
Multi-turn actuators
With SAV .2 multi-turn actuators for open-close duty paired with ACV 01.2 actuator controls, the proven AUMA SA/SAR range is enhanced by variable speed models. AUMA is spearheading market technology by offering a wide speed control ratio of 1:10.
SAV multi-turn actuators are rated for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min). Special sizing for longer running times is available for the S2 - 30 min duty.
To the product
Product
Linear actuators
Electric linear actuators performing a linear movement for automating globe valves, for example, can be combinations of SA multi-turn actuators and LE linear thrust units. If a lever arrangement has to be operated, the LE linear trust unit can also be mounted onto a base.
To the product
Product
Multi-turn actuators
One solution for gate, butterfly, ball/plug and globe valves. Compact actuators with intelligent functions as platform concept for tailored automation solutions.
Each PROFOX is equipped with a centrally located LED: The FOX-EYE. It provides clearly visible information about both actuator and valve status. The FOX-EYE display scheme can be configured by the user as required.
To the product
Product
Multi-turn actuators
With the multi-turn actuators SA 07.2 – SA 16.2 / SA 25.1 – SA 48.1, AUMA covers a torque range of up to 32,000 Nm.
Torques up to 120,000 Nm can be achieved by combining a multi-turn actuator with the GHT multi-turn gearbox.
To the product
Product
Multi-turn actuators
If the effective direction must be displaced by 90°, combinations of multi-turn actuators SA 07.2 – SA 16.2 / SA 25.1 – SA 48.1 and GK bevel gearboxes are used.
The output torque can be considerably multiplied.
To the product
Product
Multi-turn actuators
A sophisticated sealing system combined with excellent corrosion protection properties qualify AUMA actuators for underwater use.
Double sealed cable glands at the particularly crucial electrical connection safely prevent any ingress of water. Inner seals at all housing covers, sometimes coming in pairs, as well as a solid shaft made of stainless steel complete the universal concept.
To the product
Product
Multi-turn actuators
Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures.
Certification is performed in close collaboration with national and international certification bodies.
To the product
Product
Multi-turn actuators
With SAVEx .2 multi-turn actuators for open-close duty paired with intelligent ACVExC 01.2 actuator controls, the proven AUMA SAEx/SAREx range is enhanced by variable speed models.
SAVEx multi-turn actuators are rated for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min). Special sizing for longer running times is available for the S2 - 30 min duty.
To the product
Product
Multi-turn actuators
The "small" electric globe valve actuator range with separate MEC controls.
All parameters are directly set at the MEC controls. The controls contain switchgear, power supply unit, interface to the DCS. The controls automatically switch the actuator off once the valve end position is reached, motor overheating is detected or a torque overload has occurred.
All housing components of the actuator are made of bronze, all external screws are made of stainless steel. This ensures complete resistance against seawater even over a longer time period. The housing of MEC controls is made of aluminium provided with AUMA powder coating also achieving a premium corrosion resistance.
The actuators are designed for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min), the variant for modulating duty (class C) S4 - 40%.
To the product
Product
Multi-turn actuators
The "small" electric globe valve actuator range with integral controls. All parameters are directly set at the actuator. The controls contain switchgear, power supply unit, interface to the DCS. The controls automatically switch the actuator off once the valve end position is reached, motor overheating is detected or a torque overload has occurred.
All housing parts are made of aluminium. For this reason, the actuators are very low in weight.
The SVC actuators are designed for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min), the SVCR actuators for modulating duty (class C) S4 - 40%.
To the product
Product
Multi-turn actuators
The "small" electric globe valve actuator range with integral controls. All parameters are directly set at the actuator. The controls contain switchgear, power supply unit, interface to the DCS. The controls automatically switch the actuator off once the valve end position is reached, motor overheating is detected or a torque overload has occurred.
All housing components are made of bronze, all external screws are made of stainless steel. This ensures complete resistance against seawater even over a longer time period.
The SVM actuators are designed for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min), the SVMR actuators for modulating duty (class C) S4 - 40%.
To the product
Product
Multi-turn actuators
The TIGRON is a multi-turn actuator with classic mission: Automation of gate valves with/without rising stem, of globe valves (double block and bleed valves) and in combination with part-turn gearbox of butterfly valves and ball valves.
Virtually unlimited stroke
Rising stems are led through the hollow shaft of the multi-turn actuator which drives the stem in combination with the output drive type A. The stem protection tube protects the stem from pollution and people from injuries.
Open-close duty, positioning duty and modulating duty
TIGRON actuator versions are available for all types of duty. Combinations with multi-turn gearboxes In combination with GK or GST gearboxes, torques up to 16,000 Nm can be reached.
Modular AUMA scheme
Six gearbox type ranges are part of AUMA’s product portfolio. They are ideally suited to complete and enhance TIGRON’s application range even to other valve designs. This includes numerous butterfly valves or the conventional ball valves of the oil and gas industry requiring a part-turn movement of mostly 90 degrees. In these cases, TIGRON is combined with AUMA part-turn gearboxes.
AUMA linear thrust units convert TIGRON’s multi-turn movement into a thrust movement which is required for globe valve automation.
To the product
Product
Part-turn actuators
With the FQM fail safe unit, AUMA offers innovative and safe actuator solutions for automatic operation of valves in case of emergencies making use of stored mechanical energy.
Constant torque characteristics across the overall torque range.
The spring is not operated during standard operation. As a consequence, actuator sizing can be relatively small.
The end position switches are automatically set during the setting procedure of end positions OPEN and CLOSED and do not require separate adjustment.
To the product
Product
Part-turn actuators
One solution for gate, butterfly, ball/plug and globe valves. Compact actuators with intelligent functions as platform concept for tailored automation solutions.
Each PROFOX is equipped with a centrally located LED: The FOX-EYE. It provides clearly visible information about both actuator and valve status. The FOX-EYE display scheme can be configured by the user as required.
To the product
Product
Part-turn actuators
When combining SA multi-turn actuators with GS part-turn gearboxes, the combination acts as electric part-turn actuator fulfilling higher torque requirements.
Thus, these combinations represent a complement to the SQ part-turn actuators with their 2,400 Nm torque range limit.
To the product
Product
Part-turn actuators
The "small" electric part-turn actuator range with separate MEC controls.
All parameters are directly set at the MEC controls. The controls contain switchgear, power supply unit, interface to the DCS. The controls automatically switch the actuator off once the valve end position is reached, motor overheating is detected or a torque overload has occurred.
All housing components of the actuator are made of bronze, all external screws are made of stainless steel. This ensures complete resistance against seawater even over a longer time period. The housing of MEC controls is made of aluminium provided with AUMA powder coating also achieving a premium corrosion resistance.
The actuators are designed for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min), the variant for modulating duty (class C) S4 - 40%.
To the product
Product
Part-turn actuators
The "small" electric part-turn actuator range with integral controls. All parameters are directly set at the actuator. The controls contain switchgear, power supply unit, interface to the DCS. The controls automatically switch the actuator off once the valve end position is reached, motor overheating is detected or a torque overload has occurred.
All housing parts are made of aluminium. For this reason, the actuators are very low in weight.
The SGC actuators are designed for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min), the SGCR actuators for modulating duty (class C) S4 - 40%.
To the product
Product
Part-turn actuators
The "small" electric part-turn actuator range with integral controls. All parameters are directly set at the actuator. The controls contain switchgear, power supply unit, interface to the DCS. The controls automatically switch the actuator off once the valve end position is reached, motor overheating is detected or a torque overload has occurred.
All housing components are made of bronze, all external screws are made of stainless steel. This ensures complete resistance against seawater even over a longer time period.
The SGM actuators are designed for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min), the SGMR actuators for modulating duty (class C) S4 - 40%.
To the product
Product
Part-turn actuators
Part-turn actuators of the SQ .2 type range are designed for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min).
Actuators of the SQ .2 type range can be combined with various controls: From simple OPEN-CLOSE controls to the micro-controlled version with logging of operating data or fieldbus interface.
To the product
Product
Part-turn actuators
Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures.
Certification is performed in close collaboration with national and international certification bodies.
To the product
Product
Part-turn actuators
With SQV .2 part-turn actuators for open-close duty paired with ACV 01.2 actuator controls, the proven AUMA SQ/SQR range is enhanced by variable operating time models. AUMA is spearheading market technology, offering a wide operating time range with a ratio of up to 1:10.
Part-turn actuators of the SQV .2 type range are designed for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min).
To the product
Product
Part-turn actuators
With the SQVEx .2 part-turn actuators for open-close duty, AUMA offers electric actuators with variable operating time, certified for use in potentially explosive atmospheres.
Part-turn actuators of the SQVEx .2 type range are designed for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min).
To the product
Product
Multi-turn gearboxes
High pressure impacts in pipelines demand multi-turn actuators supplying high torques. When combining multi-turn actuators with GHT multi-turn gearboxes, the torque range can be extended to 120,000 Nm.
To the product
Product
Multi-turn gearboxes
If the effective direction must be displaced by 90°, GK bevel gearboxes are used.
The output torque can be considerably multiplied.
To the product
Product
Multi-turn gearboxes
GP multi-turn gearboxes in combination with SA multi-turn actuators act as multi-turn actuators with higher output torques.
They are typically used with stem gate and wedge gate valves. Due to their compact design, these gearboxes can also be used in confined spaces.
To the product
Product
Multi-turn gearboxes
If the drive shaft is to be positioned at a certain angle to the output drive shaft, combinations of the SA multi-turn actuators with GST spur gearboxes are used.
The output torque can be considerably multiplied.
To the product
Product
Part-turn gearboxes
In spite of the high degrees of automation, there are still valves requiring manual operation. This is in particular the case if the respective valves are only rarely operated for opening or closing.
The GHE type range with the housing made of bronze is suitable for operating part-turn valves (butterfly valves and ball valves), as predominantly deployed in shipbuilding.
To the product
Product
Part-turn gearboxes
AUMA part-turn gearboxes are used for operating part-turn and special valves (damper, flue gas damper, ball valves).
Product
Industrial Ethernet
HART makes use of the known 4 – 20 mA standard signal for analogue data transmission. HART communication is modulated as additional signal to the analogue signal. Advantages: The digital HART signal can be transmitted simultaneously to the digital signal. The existing 4 – 20 mA infrastructure is thus also available for digital communication. Consequently, this allows for reading additional parameters and diagnostic data from field devices.
HART is based on the host-field device principle. The optional multidrop HART topology essentially complies with the line structures of fieldbus systems. In most cases, the conventional 4 – 20 mA point-to-point communication is used.
To the product
Product
Communication systems
Many different fieldbus systems are available on the market. Certain preferences have evolved on a regional level or specifically to certain plant applications. Since AUMA actuators are implemented in all types of technical process plants around the globe, they are available with interfaces for the different established fieldbus systems within the process automation industry.
Overall, AUMA devices are available with digital and analogue inputs to connect additional sensors to the fieldbus.
To the product
Product
Communication systems
SIMA² Master Station is AUMA’s performing platform for the control and supervision of actuators via standardised fieldbus systems. The system optimises communication between host and field level and caters for efficient processes within the installation.
Configuration, operation and asset management of actuators and other field devices are simplified. A large variety of redundancy options maximises plant availability. Comprehensive diagnostic functions ensure perfect installation overview.
To the product
Product
Actuator controls
AUMA offers sophisticated control for premium safety requirements with AC 01.2-SIL or ACExC 01.2-SIL actuators controls. SA .2 and SQ .2 actuators combined with these actuator controls can be deployed in safety-related system systems up to SIL 3. AC 01.2 actuator controls in SIL version are equipped with an additional SIL module designed for the execution of safety functions. In case of an emergency at the plant and when requesting a safety function, the standard logic of AC is bypassed and the safety function is performed via the safe SIL module. Consequently, the safety function always overrules standard operation. SA .2 and SQ .2 actuators equipped with these actuator controls have been certified by TÜV Nord. They are suitable for the following safety functions:
Product
Actuator controls
Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures. Certification is performed in close collaboration with national and international certification bodies. For multi-turn actuators SAEx/SAREx 07.2 – SAEx/SAREx 16.2 and part-turn actuators SQEx/SQREx 05.2 – SQEx/SQREx 14.2, AUMATIC ACExC 01.2 actuator controls with integral local controls are available.
To the product
Product
Actuator controls
AM actuator controls with their straightforward design are the perfect choice when using parallel signal transmission while a relatively low number of feedback signals is required. Few parameters need to be defined via sliding switches during commissioning, e.g. type of seating in end positions. Control is made via operation commands OPEN, STOP, CLOSE. Reaching an end position and collective fault signals are reported back to the DCS as feedback signals. These signals are visually displayed at the local controls via the indication lights. As an option, the valve position can be transmitted as 0/4 – 20 mA signal to the DCS.
To the product
Product
Actuator controls
Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures. Certification is performed in close collaboration with national and international certification bodies. For multi-turn actuators SAEx/SAREx 07.2 – SAEx/SAREx 16.2 and part-turn actuators SQEx/SQREx 05.2 – SQEx/SQREx 14.2, AUMA MATIC AMExC 01.1 actuator controls with integral local controls are available.
To the product
Product
Accessories
The lockable protection covers and lock kits prevent unauthorised operation of actuator controls or handwheels.
Product
Accessories
The sunshade is a valuable aid to protect actuator controls against environmental impacts.
To the product
Product
Accessories
Parking frame (PAF) for safe storage of unplugged electrical connections, providing protection against direct touch of open contacts.
The variants equipped with pin carriers allow preserving the available fieldbus connection when disconnecting the actuator controls.
To the product
Product
Multi-turn actuators
SA multi-turn actuators are rated for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min). Special sizing for longer running times is available for the S2 - 30 min duty.
SAR multi-turn actuators are rated for modulating duty (class C) S4 - 25 %. Special versions for S4 - 50 % and S5 - 25 % are also available.
The actuators can be combined with different actuator controls: From simple OPEN-CLOSE actuator controls to the micro-controlled version with logging of operating data or fieldbus interface.
To the product
Product
Multi-turn actuators
Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures.
Certification is performed in close collaboration with national and international certification bodies.
To the product
Product
Multi-turn actuators
With SARV .2 multi-turn actuators for modulating duty paired with ACV 01.2 actuator controls, the proven SA/SAR range is enhanced by variable speed models. AUMA is spearheading market technology by offering a wide speed control ratio of 1:10.
SARV multi-turn actuators are rated for modulating duty (class C) S4 - 25 %. Special versions for S4 - 50 % are also available.
To the product
Product
Multi-turn actuators
A sophisticated sealing system combined with excellent corrosion protection properties qualify AUMA actuators for underwater use.
Double sealed cable glands at the particularly crucial electrical connection safely prevent any ingress of water. Inner seals at all housing covers, sometimes coming in pairs, as well as a solid shaft made of stainless steel complete the universal concept.
To the product
Product
Linear actuators
Electronic actuators with variable speed control. Electronic setting of torque and stroke with function monitoring. Power supply unit with wide range input Actuator applications for demanding control automation tasks in industrial environments with potentially explosive atmospheres.
To the product
Product
Multi-turn actuators
With SARVEx .2 multi-turn actuators for modulating duty paired with intelligent ACVExC 01.2 actuator controls, the proven SAEx/SAREx range is enhanced by variable speed models.
SARVEx multi-turn actuators are rated for modulating duty (class C) S4 - 25 %. Special versions for S4 - 50 % are also available.
To the product
Product
Multi-turn actuators
Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures.
Certification is performed in close collaboration with national and international certification bodies.
To the product
Product
Part-turn actuators
Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures.
Certification is performed in close collaboration with national and international certification bodies.
To the product
Product
Part-turn actuators
Part-turn actuators of the SQR .2 type range are designed for modulating duty (class C) S4 - 25 %.
Actuators of the SQR .2 type range can be combined with various controls: From simple OPEN-CLOSE controls to the micro-controlled version with logging of operating data or fieldbus interface.
To the product
Product
Part-turn actuators
Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures. Certification is performed in close collaboration with national and international certification bodies.
To the product
Product
Part-turn actuators
With SQRV .2 part-turn actuators for modulating duty paired with ACV 01.2 actuator controls, the proven AUMA SQ/SQR range is enhanced by variable operating time models. AUMA is spearheading market technology, offering a wide operating time range with a ratio of up to 1:10.
The part-turn actuators of SQRV .2 range are rated for modulating duty (class C) S4 - 25 %.
To the product
Product
Part-turn actuators
With the SQVEx .2 part-turn actuators for modulating duty, AUMA offers electric actuators with variable operating time, certified for use in potentially explosive atmospheres.
Part-turn actuators of the SQRVEx .2 type range are designed for modulating duty (class C) S4 - 25 %.
To the product
Product
Communication systems
Today, classic Ethernet is the leading standard for cable-based data networks in office environments. “Industrial Ethernet” describes the enhancements allowing the use of Ethernet even for sophisticated applications in industrial automation.
To the product
Product
Multi-turn actuators
If the drive shaft is to be positioned at a certain angle to the output drive shaft, combinations of the SA multi-turn actuators with GST spur gearboxes are used. The output torque can be considerably multiplied.
To the product
Product
Industrial Ethernet
Profinet is a communication protocol for industrial automation technology based on Ethernet. Profinet uses the basic functional model of Profibus which allows smooth change-over to the new technology for Profibus users. Profinet combines the advantages of a known fieldbus system and Industrial Ethernet.
AUMA actuators with Profinet support the entire functional scope of AC .2 actuator controls, allowing easy and flexible integration into virtually any type of network.
To the product
Product
Industrial Ethernet
EtherNet/IP is a communication protocol for industrial automation technology based on Ethernet. EtherNet/IP uses the CIP (Common Industrial Protocol) known from DeviceNet.
AUMA actuators with AC .2 actuator controls support EtherNet/IP, allowing easy and flexible integration into virtually any type of network.
To the product
Product
Industrial Ethernet
Modbus TCP is a communication protocol for industrial automation technology based on Ethernet. Modbus TCP corresponds to the direct implementation of the established Modbus protocol (RTU) to a TCP/IP based communication. Existing Modbus applications can thereby easily use a connection-based, secure exchange of process data via an existing Ethernet network.
Contrary to other protocols, Modbus can handle delayed messages which occur often e.g. for modem connections or wireless networks.
This way, Modbus enables reliable control, device monitoring and data recording, even from a distance.
AUMA actuators with AC .2 actuator controls support Modbus TCP, allowing easy and flexible integration into virtually any type of network.
To the product
Product
Accessories
Frame for sealing the actuator against ingress of water and other pollution, even when disconnecting the electrical connection from the device.
To the product
Product
Accessories
The wall bracket (WH) and the cable set for wall bracket (LSW) allow mounting the actuator controls separately from the actuator.
Retrofitting is always possible and is particularly appropriate if actuators are difficult to access, subject to strong vibration or high ambient temperatures at valve level, for example.
The maximum permissible distance is 100 metres.
To the product
Product
Accessories
Floor pedestals allow an elevated mounting of actuators and gearboxes.
They are perfectly suited for manual operation of valves in pit applications.
If required, floor pedestals are also available as special versions.
To the product
Product
Accessories
The retrofit kit replaces the handwheel by a square head power tool adapter. This allows emergency operation of the valve by using a power tool, considerably reducing the force and time requirements in critical situations.
A combination of adapter for power tool emergency operation and stem extension is available for pit applications.
To the product
Product
Accessories
The handwheel stem extension allows accessibility of the handwheel even in spaces with difficult access and can be led through walls, for example.
The extension is available in a variety of lengths.
To the product
Product
Accessories
The chainwheel allows for manual operation of actuators placed at considerable heights.
A remote activation via cable hoist allows for activation of the manual operation.
To the product
Product
Accessories
The chainwheel allows for manual operation of gearboxes placed in considerable heights.
To the productglobal-search.results.type.locations
Fax +974 4033 8899
Doha Qatar
global-search.results.type.locations
Fax + 97 3 17877366
Manama Bahrain
global-search.results.type.locations
Fax +97 3 17877355
Area Manama – Alfateh Bahrain
global-search.results.type.locations
Fax
31478 Dammam Saudi Arabia
global-search.results.type.locations
For the area you selected, no direct contact person is available.However, the AUMA staff of the Location mentioned below will kindly look after your request. Congo - Kinshasa, Congo - Brazzaville
Fax +2786 219 9536
1560 Springs South Africa
global-search.results.type.locations
Fax +966 3 897 6759
31411 Dammam Saudi Arabia
global-search.results.type.locations
Fax +91 120-3060523
201 301 Noida India
global-search.results.type.locations
Fax +965-24817442
22004 Salmiyah Kuwait
global-search.results.type.locations
Fax +20 2 23586621
Cairo Egypt
global-search.results.type.locations
Fax +92 42 3665 4594
54000 Cavalry Ground, Lahore Cantt Pakistan
global-search.results.type.locations
Fax +962 - 6 - 5335800
11953 Amman Jordan
global-search.results.type.locations
Fax +212 0522 35 41 52
20590 Casablanca Morocco
global-search.results.type.locations
Fax
9380000 Santiago de Chile Chile
global-search.results.type.locations
Fax +961 9 548 038
4501 7401 JBEIL Beirut Lebanon
global-search.results.type.locations
Fax +81-(0)44-863-8372
211-0016 Kawasaki-shi Kanagawa Japan
global-search.results.type.locations
Fax
ZBR 2243 Zabbar Malta
global-search.results.type.locations
Fax +21 670 69 1333
2036 La Soukra Ariana Tunisia
global-search.results.type.locations
Fax +82 2 2624 3401
153-702 Gasan-dong, GeumChun-Gu, Seoul South Korea
global-search.results.type.locations
Fax +30 210 2409486
13675 Acharnai, Greece
global-search.results.type.locations
Fax +351 211 307 100
2730-061 Queluz de Baixo Portugal
global-search.results.type.locations
Fax +86 22 6625 1320
300457 Tianjin China
global-search.results.type.locations
Fax +90 312 217 33 88
06810 Çankaya / ANKARA Türkiye
global-search.results.type.locations
Fax +1 724-743-4711
PA 15317 Canonsburg United States
global-search.results.type.locations
Fax
43480 VILA-SECA (Tarragona) Spain
global-search.results.type.locations
Fax +359 2 9179-312
1632 Sofia Bulgaria
global-search.results.type.locations
Fax +40 372 303967
011783 Bucuresti Romania
global-search.results.type.locations
Fax +385 1 6531 484
71000 Sarajevo Bosnia & Herzegovina
global-search.results.type.locations
Fax +36 93/324-616
8800 Nagykanizsa Hungary
global-search.results.type.locations
Fax
89518 Heidenheim Germany
global-search.results.type.locations
Fax +49 7631 809 - 1250
79373 Muellheim Germany
global-search.results.type.locations
Fax
94901 Nitra Slovakia
global-search.results.type.locations
Fax +49 81 65 9017- 2018
85386 Eching Germany
global-search.results.type.locations
Fax +49 711 34803 - 3034
73747 Ostfildern Germany
global-search.results.type.locations
Fax +33 1 39321755
95150 Taverny France
global-search.results.type.locations
Fax
67346 Speyer Germany
global-search.results.type.locations
Fax +420 326 303 251
250 01 Brandýs n.L.-St.Boleslav Czechia
global-search.results.type.locations
Fax +49 9187 9227 75244
96242 Sonnefeld Germany
global-search.results.type.locations
Fax +48 32 783 52 08
41-219 Sosnowiec Poland
global-search.results.type.locations
Fax +38 044 586-53-03
02099 Kiev Ukraine
global-search.results.type.locations
Fax
57482 Wenden Germany
global-search.results.type.locations
Fax +32 51 24 77 90
8800 Roeselare Belgium
global-search.results.type.locations
Fax
50858 Köln Germany
global-search.results.type.locations
Fax +44 1275 875492
Clevedon North Somerset BS21 6TH United Kingdom
global-search.results.type.locations
Fax +49 2309 60 80 26
45731 Waltrop Germany
global-search.results.type.locations
Fax +49 39204 759 - 9489
39167 Niederndodeleben Germany
global-search.results.type.locations
Fax +49 39204 759 - 9429
39167 Niederndodeleben Germany
global-search.results.type.locations
Fax +31 71 581 40 49
2314 XT Leiden Netherlands
global-search.results.type.locations
Fax +48 22 612 74 87
04-994 Warszawa Poland
global-search.results.type.locations
Fax +48 61 640 01 35
62-300 Września Poland
global-search.results.type.locations
Fax +49 4141/779 18-26
21684 Stade-Hagen Germany
global-search.results.type.locations
Fax +48 58 667 30 96
84-230 Rumia Poland
global-search.results.type.locations
Fax
EE-10412 Tallinn Estonia
global-search.results.type.locations
Fax
15810 West Pakulonan Indonesia
global-search.results.type.locations
Fax
02230 Espoo Finland
global-search.results.type.locations
Fax +49 7720 8540-50
78054 Villingen-Schwenningen Germany
global-search.results.type.locations
Fax +49 3523 74142
01640 Coswig Germany
global-search.results.type.locations
Fax +385 1 6531 484
10437 Bestovje Croatia
global-search.results.type.locations
Fax +381 11 4075 731
11250 Beograd Serbia
global-search.results.type.locations
Fax + 974 4033 8899
Doha Qatar
global-search.results.type.locations
global-search.results.type.locations
Fax
Basrah Iraq
global-search.results.type.locations
global-search.results.type.locations
Fax + 1 868 658 1753
Marabella, Trinidad, W.I. Trinidad & Tobago
global-search.results.type.locations
Fax
60161 Surabaya Indonesia
global-search.results.type.locations
Fax
LT-08247 Vilnius Lithuania
global-search.results.type.locations
Fax
11130 Mahasawat, Bangkrouy, Nonthaburi Thailand
global-search.results.type.locations
global-search.results.type.locations
global-search.results.type.locations
Fax
Kigali City Rwanda
global-search.results.type.locations
global-search.results.type.locations
Fax
Dubai United Arab Emirates
global-search.results.type.locations
Fax +49 2234 20379 – 099
50858 Köln Germany
global-search.results.type.locations
Fax
90518 Altdorf Germany
global-search.results.type.locations
Fax +971-2-6339794
Al Nahyan camp, Abu Dhabi United Arab Emirates
global-search.results.type.locations
Fax
A94K4P Co. Dublin Ireland
global-search.results.type.locations
Fax +91 80 2839 2809
560 058 Bangalore India
global-search.results.type.locations
Fax
641 004 Coimbatore India
global-search.results.type.locations
Fax +62 21 56 967 624
11470 Jakarta Indonesia
global-search.results.type.locations
Fax
11460 Jakarta Indonesia
global-search.results.type.locations
Fax
28830 San Fernando de Henares (Madrid) Spain
global-search.results.type.locations
Fax
Ruwi Oman
global-search.results.type.locations
Fax
BP: 23460 Dakar Dakar Ponty Senegal
global-search.results.type.locations
Fax
1770 Barangay Sucat Muntinlupa City Philippines
global-search.results.type.locations
Fax
Marcory Côte d’Ivoire
global-search.results.type.locations
global-search.results.type.locations
global-search.results.type.locations
global-search.results.type.locations
Fax +65 6 4818269
569511 Singapore Singapore
global-search.results.type.locations
Fax
La Paz Bolivia
global-search.results.type.locations
Fax
Ho Chi Minh City Vietnam
global-search.results.type.locations
Fax
Miraflores - Lima Peru
global-search.results.type.locations
Fax
600 017 Chennai India
global-search.results.type.locations
Fax
170521 Quito Pichincha Ecuador
global-search.results.type.locations
Fax
NSW 2064 Artarmon Australia
global-search.results.type.locations
Fax +63 2 534 1217
1550 Mandaluyong City Philippines
global-search.results.type.locations
Fax
500038 Hyderabad, Telangana State India
global-search.results.type.locations
Fax
411 045 Pune India
global-search.results.type.locations
Fax
40300 Shah Alam Selangor Malaysia
global-search.results.type.locations
Fax
C.P. 11530 Ciudad de México Mexico
global-search.results.type.locations
Fax +852 2416 3763
Tsuen Wan, Kowloon Hong Kong SAR China
global-search.results.type.locations
Fax
700082 Kolkata India
global-search.results.type.locations
Fax +968 24 479066
Ruwi Oman
global-search.results.type.locations
Fax +55 11 4612-3477
06707-050 Sao Paulo Brazil
global-search.results.type.locations
Fax
51888 Yanbu Saudi Arabia
global-search.results.type.locations
Fax +97 1 48815298
Jebel Ali (South Zone) Dubai United Arab Emirates
global-search.results.type.locations
Fax
11584 Riyadh Saudi Arabia
global-search.results.type.locations
Fax +886 2 8228 1975
Jhonghe City Taipei Hsien (235) Taiwan
global-search.results.type.locations
For the area you selected, no direct contact person is available.However, the AUMA staff of the Location mentioned below will kindly look after your request. Albania
Fax +43 2252 8254050
2512 Tribuswinkel Austria
global-search.results.type.locations
Fax
20039 Malmö Sweden
global-search.results.type.locations
Fax +218 21 462 0220
535022 Tripoli Libya
global-search.results.type.locations
Fax
1086 Oslo Norway
global-search.results.type.locations
Fax
8800 Viborg Denmark
global-search.results.type.locations
Fax
050060 Almaty City Kazakhstan
global-search.results.type.locations
Fax
050009 Almaty Kazakhstan
global-search.results.type.locations
Fax +213 23 52 40 48
Bir Mourad Rais Algiers Algeria
global-search.results.type.locations
Fax +39 0331 517606
20023 Cerro Maggiore (MI) Italy
global-search.results.type.locations
For the area you selected, no direct contact person is available.However, the AUMA staff of the Location mentioned below will kindly look after your request. Albania, Algeria
Fax
Buenos Aires Argentina